WIDE SELECTION OF COLORS
29 gauge, 36 inch coverage, cut to the nearest inch
Metal Roofing and Siding Information
Warranty: There is a 40 year warranty on our #1 material. The warranty is on the paint and is written by the paint manufacture (Akzo Nobel). A copy of the warranty can be obtained from our website or you can request a copy from the metal shop. The warranty does not cover a leak. A leak is an installation or condensation issue.
Galvalume®: Galvalume® sheet steel is a 55% Al-Zn coated sheet steel product. Currently all of our 40 year warranted painted steel is Galvalume®.
Sweating/Condensation: Metal will condensate or sweat. When installing, you need to keep proper ventilation and use vapor barriers to reduce and control this condensation.
Loading: If you decide to haul your order yourself, we will help you load it on your truck or trailer, but we will not strap or tie it down. Also, we are not responsible for any damages done to vehicles or trailers due to loading or hauling your order.
Storing: We use plastic to cover all orders. We also store orders under a shed roof. This is done to reduce the possibility of wicking. Wicking can occur if metal roofing or siding is stored in a stacked position for a long period of time, moisture will find its way between the sheets. If this water lies between the sheets too long it will ruin the paint finish of the metal.
Installers: Kenny Queen Hardware & Supply, Inc. does not install metal roofing or siding. All contractor names obtained from our metal shop, front board or any employee is merely contact information and not a referral. You should research yourself and receive referrals and ask for the proper licensing and contract information before picking your contractor.
Metal Shavings: If shavings are created by cutting, drilling or shearing the roofing or siding they must be wiped off of the metal. Metal shavings left on the roof or siding will rust in a matter of days, regardless of the pitch of the roof or siding. Although this will be surface rust, it might shorten the life of the product.
Touch up Paint: Touch up paint when applied is the same color as the metal color. However, it might fade or lose its adhesion quicker than the heat treated paint system that is on the 40 year warranty product.
Bottom Primer: The primer on the bottom side of the metal is an important part of the paint system. If installing over shingles, you should use felt paper of a similar product to protect the primer coating on the bottom of the metal.
Quotes/Estimates are good for 30 days