Check Store for Availability

2018 Cub Cadet PRO Z 554S KW

$10,299.00


Availability
Brochure
Year
2018
Manufacturer
Cub Cadet
Model
PRO Z 554S KW

Overview

Description

Specifications
  • Steering Wheel Control: Steering wheel w/ quick-adjust tilt column
Steering
  • Lap Bar / Steering Wheel Control: High Performance Steering Wheel with electronic power steering & Foot-pedal Control
Chassis
  • Rear Bumper: 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
  • Front Axle / Yolks: 2 in. x 3 in. solid axle tube and 1/2 in. thick steel front yokes
  • Frame: Fully welded, full-length 3/8 x 5 in. laser cut steel / integrated tie-down slots
  • ROPS: 2 in. x 2 in. spring-latch tool-less foldable 3 position
Operation
  • Front Tires: 15 in. x 6 in. - 6 in. smooth (turf)
  • Rear Tires: 24 in. x 12 in. - 12 in. (Turf Tread)
  • Park Brake / Braking: Hand-operated lever with integrated hydro pump release lever
  • Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
  • Cruise Control: N/A
  • Seat Type: High-back dial suspension with EVC Cushion seat beltangle back adjust arm rests
  • PTO Clutch: Warner Clutch - 125 ft lb.
Mower Deck
  • Deck Size/Type: 54 in. FABRICATED DECK
  • Spindle Construction: 8 in. sealed cast aluminum housing (maintenance-free)
  • Deck Blades: 3 high-lift Marbain® blades / 18,500 fpm (approx.)
  • Trim-Side Wear Guard: 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard
  • Side Construction: 5/16 in.(.313) steel on trim and discharge sides
  • Cutting Height: 1 in. - 5 in.
  • Discharge Chute: High-density, impact-resistant rubber
  • Bottom Reinforcement: 7ga. (.187 in.) bottom plate
  • Deck Height Adjustment: Foot pedal with spring assist 16 Positions
  • Rolled Leading Edge Reinforcement: 1/4 in. (.250 in.) steel
  • Deck Material: fabricated 7ga. (.187") steel shell
  • Top Reinforcement(s): 7ga. (.187 in.) top plate
  • Deck Style/Construction: 7ga. top plate 7ga. bottom reinforcement 1/4" rolled leading edge
  • Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
General
  • Cup Holder: Intergrated into Side Pod
  • Hour Meter: Standard electronic
Warranty
  • Warranty: 3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty
Engine & Drive System
  • Fuel Capacity: Twin 7.45 gal. tanks (14.9 gal. total) with dial gauge
  • Horsepower / CC's: 27hp - 852cc
  • Engine Type: Kawasaki FX850v
  • Ground Speed: Fwd: 10 mph/Rev: 5 mph
  • Transmission: Parker HTJ Series 12cc pump / 260cc wheel motor
Dimensions
  • L / W / H with discharge chute UP and ROPs DOWN: 84 in. L x 56 in. W x 50 in. H
  • Weight (approx): 1424 lb.

Specs

Engine

Horse Power
27hp - 852cc
Engine Type
Kawasaki FX850v

General

Transmission
Parker HTJ Series 12cc pump / 260cc wheel motor
Fuel Capacity
Twin 7.45 gal. tanks (14.9 gal. total) with dial gauge

Deck

Deck Size
54 in. FABRICATED DECK

Promotions



In-Stock Pro Z 500 S Series Units

Related Products